Author: Sam Lindsay

Recent Posts

How nTop Platform was used to design, analyze and print a fuel-cooled oil cooler

nTop engineers designed, analyzed and printed a fuel-cooled oil cooler using nTop Platform, ANSYS CFX and a new additive aluminum alloy developed by HRL Laboratories. This blog takes you from start to finish…

Sam Lindsay
February 12, 2020

Lattice properties based on build parameters for Additive Manufacturing

Want a quick way to know the best exposure time and laser power for ideal mechanical properties depending on strut diameter?

Sam Lindsay
January 10, 2020

John Barnes: An Interview on His Career and Lessons Learned in AM

John Barnes is the founder and managing director of The Barnes Group Advisors, an additive manufacturing engineering consultancy. He has 25+ years experience in product development in the aerospace industry. We had the…

Sam Lindsay
January 7, 2020

nTop Platform 2.0 Makes its Debut at Formnext

We announced nTop Platform 2.0 at Formnext. Below is a synopsis of how it was received through the experience of a few nTopology employees. We also highlight the upgrades and features found in…

Sam Lindsay
December 9, 2019

NFL Helmet Challenge: Making the players safer with advanced technologies

With concussions and brain injuries a growing concern in today's NFL, learn how advanced manufacturing and software like nTop Platform can be used to improve player safety.

Sam Lindsay
November 13, 2019

3 Reasons Why Renishaw Users Should Check Out nTop Platform

Renishaw users need to consider bringing nTop Platform into their workflow for many reasons. In fact, too many to be listed in this blog. However, you'll find three of the most intriguing and…

Sam Lindsay
October 4, 2019 • 6 min read

IMR Tackles the Design Challenge of a Spinal Implant Using nTopology and Renishaw

nTopology, Irish Manufacturing Research and Renishaw collaborate to design a better spinal implant allowing for greater osseointegration and patient success. Read below to learn about case study and watch the webinar discussing it…

Sam Lindsay
September 6, 2019 • 4 min read

Eliminate STL Files from Your Additive Manufacturing Process with nTopology + EOS

Learn about how you can eliminate the need for STL files and go direct from design to manufacturing with nTopology software and EOSPRINT.

Sam Lindsay
August 23, 2019 • 5 min read

nTopology and Betatype: A Partnership Story

Discover how the partnership between nTopology and Betatype provides an additive design and slicing workflow that allows engineers to iterate faster and reduce build time.

Sam Lindsay
August 15, 2019 • 3 min read