Blog

Recent Posts

Blog

Introducing the NFL Helmet Challenge DfAM eSeries

Our first ever month-long series with videos, live panel discussions, and guest blogs

Duann Scott
March 31, 2020

Expanding the nTop ecosystem with CADS Additive

Our latest integration with nTop Platform and AM-Studio from CADS Additive gives engineers who design for metal AM the ability to consider advanced design, material property and laser toolpath.

Fabian Grupp
March 26, 2020

nTopology and COVID-19

We are here to help

Bradley Rothenberg
March 24, 2020

How to get the most out of topology optimization

With the rise of additive manufacturing and introduction of limitless complexity, read this blog to learn how to utilize topology optimization to its fullest potential.

Andrew Sartorelli
March 19, 2020 • 4 min read

nTop and ORNL collaborating to develop innovative toolkits

Along with ORNL we are going to develop a number of new toolkits with the intent of connecting design and additive manufacturing processes. We will ultimately make these toolkits available to all nTop…

Duann Scott
March 5, 2020

How nTop Platform was used to design, analyze and print a fuel-cooled oil cooler

nTop engineers designed, analyzed and printed a fuel-cooled oil cooler using nTop Platform, ANSYS CFX and a new additive aluminum alloy developed by HRL Laboratories. This blog takes you from start to finish…

Sam Lindsay
February 12, 2020

Lattice properties based on build parameters for Additive Manufacturing

Want a quick way to know the best exposure time and laser power for ideal mechanical properties depending on strut diameter?

Sam Lindsay
January 10, 2020

John Barnes: An Interview on His Career and Lessons Learned in AM

John Barnes is the founder and managing director of The Barnes Group Advisors, an additive manufacturing engineering consultancy. He has 25+ years experience in product development in the aerospace industry. We had the…

Sam Lindsay
January 7, 2020

Taking Heat Exchanger Design to the Next Level with High-Performance Geometry

Heat exchanger efficiency has long been held back by traditional modeling software and manufacturing processes not capable of producing advanced geometries. Read below to see how nTop Platform enables heat exchanger designs with…

Ryan O'Hara
December 16, 2019

nTop Platform 2.0 Makes its Debut at Formnext

We announced nTop Platform 2.0 at Formnext. Below is a synopsis of how it was received through the experience of a few nTopology employees. We also highlight the upgrades and features found in…

Sam Lindsay
December 9, 2019